Download Acrobat (PDF) Specification Sheet CMS_Design_Selection.pdf (601kb)

Heat Exchanger Designs and Selections • Differential Thermal Expansion • Pass Arrangements for Flow Through Tubes • Shell Side Fluid Flow Impingement Plates (based on application) • Maintenance and Servicing Considerations • Principal Components • Heat Exchanger Tubes Materials of Construction • Economic Considerations in Heat Exchanger Selection • Heat Exchanger Rating versus Expected Loads Fundamental Heat Transfer • Load is the Measure of Heat Transferred • A Combination of Three Factors Governs Load Capacity Heat Transfer Coefficient (U) Depends on Many Variables • Area is the Total Effective Tube Area

Impingement Plates (based on application)

When the impact factor exceeds the TEMA (Tubular Exchanger Manufacturers Association) limits and when corrosive, erosive, or two-phase fluids enter the bundle, impingement protection is recommended. Most frequently used for impact protection is the impingement plate (impact plate).

CMS Heat Transfer Division, Inc.
55 Greene Street • Bay Shore, NY 11706-7023 USA
Tel: 631-968-0084 • Fax: 631-968-0184 • Email: info@cmsheattransfer.com